Intelligent heat removal and monitoring solution for servers, network switches and phone systems in small spaces.
The ClosetAir system removes hot air and sends it to the outside corridor or ceiling plenum return, providing control and monitoring via a built-in web server. The web pages, including graphs, are generated by the unit to track settings and environmental conditions within the room.
The ClosetAir is a complete management system that provides remote visibility of your room environment. This system is ideal for mounting on the wall or ceiling and provides automated heat exhaust while intelligently monitoring your equipment. Receive alert notifications if critical values fall outside the user-defined threshold.
The ClosetAir system includes one internal temperature sensor, two external temperature sensors, and two additional ports to add extra external temperature sensors (optional).
Use the out-of-box setting or set your desired temperature to maintain control within the IT space.
The system comes pre-programmed and requires no initial programming for standard operation. Modifications to factory settings are very simple and can be performed with any machine that has a hardwire network port and a web browser.
ClosetAir can be mounted on the wall or ceiling. Installation time is typically less than one hour.
The unit is not just an intelligent fan, it is also an environmental monitoring system, with the ability to set alarm levels and email alerts. The ClosetAir includes two temperature sensors with 20ft (6,096mm) cords with the ability to attach four total temperature sensors. This allows you to cool and monitor your room using one device.
Racknet (sold separately) aggregates hundreds of ClosetAir units into a single pane for a complete visualization of all your closets. Racknet provides flexibility for individual naming and reporting.
Automatic temperature control allows you to monitor and adjust settings from anywhere. ClosetAir is an intelligent heat removal system, ideal for 0-10kW, for computer and network systems in small spaces.
ClosetAir is easy to install, but also easy to move. ClosetAir is an ideal solution for data center white spaces where high density racks have outgrown the local cooling capacity. Use the system to quickly address hot spots where containment systems are not present.
Firmware for all Geist ActiveAir devices
Release Date: 11/28/16
Firmware for all Geist ClosetAir devices
The Geist Automated Smart Updater (ASU) is a software tool for simultaneously updating multiple Geist IP-enabled devices
Download Geist ASU v22.214.171.124
Updated to support Geist Upgradable, WD15, and WD100 v3.3.2 firmware.
Geist's FAQ section aims to answer specific questions related to this product offering. If you need further support, please contact Tech Support directly.
The units are rated at 1100 CFM. Typically IT equipment requires 110 CFM of air per Kilowatt of load. If cabinet exhaust is properly sectioned off, IT loads in the range of 10 kW can be serviced.
The ClosetAir system is designed to drop into a standard 24” x 24” ceiling tile opening. The unit utilizes tabs for attaching hanger wire for support.
Not in most cases. Since the unit is designed to be powered by a standard wall outlet and does not require changes to the cooling system, installation is very simple. However, it is always best to check with local codes to be safe.
Yes, the fans will respond to the conditions of the room and fluctuate in speed. It is recommended that temperature sensors be placed on the intake of the server racks. When conditions reach a predefined point the fans will adjust accordingly.
Yes, the unit is fully configurable over the network. Temperature set-points, alarms, email alerts, current and historic conditions can be accessed through the web interface.
Yes, the ClosetAir system is capable of sending SNMP traps and can be pulled using the included MIB file for setup.
Yes, the unit can be purchased with an optional round duct adapter that can connect with rigid or flexible ducting.
No, the web interface also allows users to set fan speed to a constant fan speed.
The unit is designed for indoor use only.
The ClosetAir system will work with POP3/SMTP, email relay/no authentication, ESMTP/TLS/SSL email set ups.
© 2016 Geist–All Rights Reserved